Filter
Top Products
a single port number, enter it in both the Start and Finish elds.
You may key in a description for the local IP address.
Click to save and apply the current settings.
Click to clear and reset the current settings.
Shows the current virtual servers
information.
Click “Setup” to display the DMZ screen and options.
If the DMZ Host
Function is enabled, it means that
a DMZ host has been set up at a
particular computer to be exposed
to the Internet so that some
applications/software, especially Internet/online games, can have
two-way connections.
Enter the IP address of a particular host in
your LAN that will receive all the packets originally going to the WAN
port/public IP address above.
Click to save the current settings.
Click to restore to the default values.
NOTE: You need to give your LAN PC clients a xed/static IP address
for the DMZ function to work properly.
Click “Setup” to display the Remote Management
screen and
options.
Select to permit remote access to the router from outside the local
network. Otherwise, keep the default setting (unselected).
Enter the port number that will be open to outside
access.
Click to save the current settings.
Click to restore to the default values.
Click “Setup” to display the URL Filtering screen and options.
20
CONFIGURATION VIA THE WEB