INITIAL SETUP
1. Connect the Wireless G Broadband Travel Router to a power outlet.
2. Connect one end of the Ethernet cable to the router and the other end
to your desktop or notebook computer.
The router features three operation modes — AP (access point), GW
(gateway) and Client Infrastructure — and is congured at the factory.
To change the settings in order to employ more advanced congurations
or change the mode of operation, use the included Web-based utility as
described in subsequent sections of this manual.
aP mode
When acting as an access point, the router
connects all stations (desktop/notebook with
wireless network adapter) to a wired network.
All stations can have Internet access if only
the router is connected to the Internet.
6
INITIAL SETUP
Power
Wireless
Ethernet
(green) Solid when device is on.
(blue) Solid when device is on.
Flashing when receiving/sending data.
(green) Solid when Ethernet cable is connected.
Flashing when receiving/sending data.