Filter
Top Products
gW mode
When GW mode is selected, the access
point will enter the gateway mode, and the
wireless connection will be set up from a
point-to-point local LAN to a point-to-
multipoint WAN.
client mode (inFrastructure)
If set to Client (Infrastructure) mode, this
device can work like a wireless station
when it’s connected to a computer so that
the computer can send packets from wired
end to wireless interface.
1. Turn on your computer and connect it to the Wireless G Broadband
Travel Router with an Ethernet cable.
2. Make sure your wired station is set to the same subnet as the router:
192.168.1.254.
3. Start your Web browser. In the “Address” eld on the menu bar, enter
“http://192.168.1.254.”
NOTE: No username or password is required for the initial login; you do,
however, have the option of setting up a username and password for
added security. (See the Password subsection in
.)
7
INITIAL SETUP