Filter
Top Products
lan interFace setuP
This is the device’s local address. (Default: 192.168.1.254.)
Default: 255.255.255.0.
Shows the default gateway IP address.
Select “Server” from the drop-down menu to enable the router
to distribute IP addresses (DHCP server) and activate the Server IP
eld to accept a starting IP address; select “Disable” to disallow such
distribution.
This is the starting IP address when “Server” is selected in
the “DHCP” drop-down menu.
This is the starting address of this local IP network
address pool, a continuous IP address segment. Keeping the default
value as 192.168.1.1 should work in most cases, as should the default
maximum of 253.
Click to show the Active DHCP Client table.
Enter the domain name service IP address.
Click to save and apply any changes in the settings.
Click to restore settings to default values.
This section offers a choice of three screens: Upgrade Firmware,
Reboot and Password Setup.
28
CONFIGURATION VIA THE WEB