Filter
Top Products
12.
Replace the cover on the computer
Closing the cover
Snapping the cover into place
13
.Reconnect all cables.
14
.Package the old CPU card for later.
• Put the used card into MACh Speed anti-static bag. If you
ever have a problem, it may be handy to be able to use
the old card while troubleshooting the system.
15
Reboot your system and work faster than ever before!
• Proceed to Chapter 3 - Installing Softwar e
Chapter 2 - Installing the MACh Speed G3 Upg rade Car d
Page 19
10
.Close the expansion card cover and snap it into place
• If the cover won’t close, make sure the CPU card has
been inserted all the way into the connector.
Closing the expansion card cover
11
.Boot your Mac to test the Card/installation.
• Check that you get a successful boot up “chime”, ensuring
that the card is well seated and working.
• Simply plug the power cord and keyboard into the Mac,
and start up the Mac. Once you have verified the “chime,
you can disconnect power, and complete the card installa-
tion. If you do not hear a “chime”, refer to Chapter 5 -
Tech Support.
Chapter 2 - Installing the MACh Speed G3 Upg rade Car d
Page 18