Filter
Top Products
About the “Advanced options ”. This area if for enabling
XLR8’s exclusive MVP technology. Refer to Chapter 4 -
Advanced Performance Tuning for more information.
2. Close the MACh Speed G3 Control, restart your system, and
enjoy working at new speeds!
NOTE: If your system hangs on boot, or displays any error mes-
sages, refer to Chapter 5 - Tech Support for more information.
Chapter 3 - Installing the Software
Page 5 1
The MACh Speed G3 Control
1. Enable the MACh Speed G3 Backside Cache.
• In the Control Panels folder of your start-up drive, dou-
ble-click on the MACh Speed G3 Control.
• This software control the activation of the backside cache
and controls the ratio at which it operates. You are now
ready to turn the backside cache on.
Step A. Select your MACh Speed G3 model from the
pull-down menu.
Step B. Select “Enable Now” to enable the backside
cache. If your system freezes at this point,
you most likely selected the wrong card.
Reboot and select again.
Step C. Now that your cache is enabled, you should
select “Enable Backside Cache at Startup” to
automatically enable the cache every time
you boot your system.
Chapter 3 - Installing the Software
Page 5 0