Filter
Top Products
1. Prepare the system and work area.
•Prepare your work area by ensuring that you have a well
lighted space, preferably not on carpet (less static), and
away from all magnetic devices.
• Put on the anti-static wrist strap, as instructed earlier.
• Turn off the computer and disconnect all cables.
2. Following the manufacturer’s recommended procedures,
remove the cover (PowerCC), or side access door (UMAX,
DayStar systems).
Removing the cover of the PowerCC PowerWave desktop
Removing the cover of the PowerCC PowerWave tower
Chapter 2 - Installing the MACh Speed G3 Upgrade Card
Page 4 1
Installation in
Non-Apple Mac OS Systems
UMAX S900, J700,
PowerCC PowerWave,
DayStar Genesis and Millennium
The MACh Speed G3 Upgrade Card gives your MacOS System
additional processing power. You install the upgrade card in the
CPU card slot in your computer.
This section will instruct yo on how to:
• Remove the cover from you computer
• Remove expansion card retainer
• Remove current CPU card
• Install the MACh Speed G3 Upgrade Card
• Replace the expansion card retainer
• Replace the computer cover
This chapter explains how to remove the CPU card currently
inside your computer and replace it with the MACh Speed G3
Upgrade Card.
Installing the CPU card is technically challenging. If you prefer,
you can ask an Apple-authorized dealer or service provider to
install it for a fee.
If you attempt to install the card yourself but experience difficul-
ties, it is recommended that you have an Apple-authorized service
provider complete the process. Apple does not warranty damage
caused by improper removal or installation of CPU cards.
Chapter 2 - Installing the MACh Speed G3 Upgrade Card
Page 4 0