Filter
Top Products
13
. Plug the auxiliary fan (9500) into the connector on the main
logic board. There is only one correct way to insert the plug.
Notice that the notch on the plug must face up
• IMPORTANT: If the fan cannot close, so that both sides
are latched, the CPU card is not fully inserted. Remove
the card, and reinstall.
Attaching the fan power to the logic board
14
. Lift the auxiliary fan back into place.
• IMPORTANT: If the fan cannot close, so that both sides
are latched, the CPU card is not fully inserted. Remove
the card, and reinstall.
Lifting the auxiliary fan (retaining clip on 8500)
Chapter 2 - Installing the MACh Speed G3 Upgrade Card
Page 2 9
12
.Reinstall the auxiliary fan
• Lift the computer back to its upright position.
• Press and hold down the small button on the floor of the
computer. Then slide the fan to the left, engaging the two
plastic loops on the floor of the computer. When the fan is
in place, the button pops up and secures it.
Reinstalling the fan (retaining clip on 8500)
Chapter 2 - Installing the MACh Speed G3 Upgrade Card
Page 2 8