Filter
Top Products
3
6. C/BW BUTTON – Press this button to select whether your scans will be in color or black and white. The
LCD will show the current mode: "COLOR" or "MONO" (black and white).
7. DPI BUTTON – Press this button to select the resolution ("dpi" or "dots per inch") of your scans. The LCD
will show "LOW" (300dpi) or "HIGH" (600dpi).
8. USB CONNECTION – Connect this jack to a free USB port on your computer using the included USB
cable. Once connected and powered on, COPY CAT will act as an SD card reader so you can transfer
your scans to your computer. See HOW TO TRANSFER SCANS for more information.
Note: When connected to your computer, COPY CAT will be powered by the USB connection, which will
not drain its batteries.
9. microSD CARD SLOT – Gently insert a microSD card
into this slot until it clicks into place. Your scans will be
saved to the card. To eject the card, push it all the way
into the slot until it clicks, then pull it out. When
connected to your computer, COPY CAT will act as an SD card reader so you can transfer your scans to
your computer. See HOW TO TRANSFER SCANS for more information.
10. FORMAT BUTTON – Press this button to format an inserted microSD card. (This will erase its contents.)
HOW TO SCAN A DOCUMENT
To scan a document, follow these steps:
1. Press and hold down the SCAN BUTTON to turn on
COPY CAT. You will see information displayed on the
LCD when COPY CAT is powered on.
2. Place COPY CAT on top of your document. Be sure the
scanning lens on the bottom is fully on the document
and not tilted or obstructed.
3. Press the SCAN BUTTON once to start the scanning
process. The green SCAN LIGHT will turn on when
scanning has begun.
4. Steadily drag COPY CAT across the length of the document, top to bottom. We recommend holding the
document firmly in place so it does not shift around while being scanned. (If the red ERROR LIGHT turns
on during the process, it means the document was scanned too quickly. Press the SCAN BUTTON once
and start again from Step #2.)
5. Once you have reached the end of the document, press the SCAN BUTTON once. The green SCAN
LIGHT will turn off.
6. If you want to scan more documents, repeat Steps #2 – 5. If you want to transfer your scans to your
computer, see the HOW TO TRANSFER SCANS section. Otherwise, press and hold down the SCAN
BUTTON to turn off COPY CAT.
For tips o
n
acquiring the clearest sca
n
s
and achieving the best results using the
text recognition feature in the software,
please see the TEXT RECOGNITION
TIPS section in this manual.
To use COPY CAT, you will need to
purchase a microSD card.
To use COPY CAT, you will need to
purchase a microSD card separately.