Filter
Top Products
49
(10) Admin.Signal Menu
This menu is for configuring settings such as display format, and for rewriting EDID.
ⅷ indicates the factory default.
Logout
host PJ-1
user: advanced
Display Mode
11
3
3
12
4
Main
Image
Setting
Convergence
Lens
Option
Admin.Network
Admin.Option
Admin.Signal
Admin.E-Mail
EDID
SET
Browse
Force Signal
SET
OFF
OFF
DVI Rate(Hz) Pixel H Pixel V Link
1 60.00 2048 2400 Dual
2
3 60.00 2048 2400 Dual
4
Signal Status
Single Double Cross
Item Setting Value Description
Force Signal Q OFF
4096ן2400, None,
Dual
4096ן2400, None,
Single
2048ן2400,
2Stripe, Dual
2048ן2400,
2Stripe, Single
2048ן1200,
Cross, Dual
2048ן1200,
Cross, Single
1024ן2400,
4Stripe, Dual
1024ן2400,
4Stripe, Single
For forcibly configuring the output signal. Make use of this setting
when there is no display due to configuration changes at the input
source.
NOTE:
● Some portions of the image may not be displayed and the image
may become noisy.
OFF : Turns off the display by force.
4096ן2400, None, Dual
: Displays a normal screen using dual link.
4096ן2400, None, Single
: Displays a normal screen using single link.
2048ן2400, 2Stripe, Dual
: Displays a 2 stripes screen using dual link.
2048ן2400, 2Stripe, Single
: Displays a 2 stripes screen using single link.
2048ן1200, Cross, Dual
: Displays a cross screen using dual link.
2048ן1200, Cross, Single
: Displays a cross screen using single link.
1024ן2400, 4Stripe, Dual
: Displays a 4 stripes screen using dual link.
1024ן2400, 4Stripe, Single
: Displays a 4 stripes screen using single link.