Filter
Top Products
50
Operation and Settings
(10) Admin.Signal Menu (Cont’d)
ⅷ indicates the factory default.
Administrator Settings
Menu (Cont’d)
Item Setting Value Description
Signal Status
DVI
Rate(Hz)
Pixel H
Pixel V
Link
^
^
^
^
^
Displays information on the input signals. Same as ASignal StatusB in the
User Menu.
DVI : Displays the DVI input terminal number.
Rate(Hz) : Displays the vertical frequency.
Pixel H : Displays the horizontal resolution.
Pixel V : Displays the vertical resolution.
Link : Displays the link status of the DVI terminal.
NOTE:
● This item is not displayed when there is no signal input.
● The text color of Rate (vertical frequency) turns red in the case of
interlaced signal. And the text turns white in the case of progressive
signal.
Display Mode Q Signal
Double
Cross
For specifying the display mode of the projection screen. Same
configuration as ADisplay ModeB in the User Menu.
Signal : Displays input signals on a single screen.
Double : Displays two different input signals on two screens. The
left screen displays images of the DVI1 terminal, and the
right screen displays images of the DVI3 terminal.
Cross : Displays four different input signals on four screens.
The top left screen displays images of the DVI1 terminal,
the top right screen displays images of the DVI2
terminal, the bottom left screen displays images of the
DVI3 terminal, while the bottom right screen displays
images of the DVI4 terminal.
EDID ^ For rewriting EDID.
Click the ABrowseB button and select an EDID file.
Click the ASETB button to start writing.
Write AOKB will be displayed for each channel. “NG (number)” is displayed
when writing fails.
Error Code
1: System error
7: Unable to execute due to power off
8: Unable to rewrite due to DVI cable connection
CAUTION:
● Do not turn off the power during rewrite.
● The EDID file capacity is within 256 byte.
● Rewriting to individual channel is not available.
● It is not possible to move on to other pages during rewrite.
NOTE:
● EDID: Extended Display Information Data
A data to describe the specifications (resolution, model number, etc.) of
the projector. The compatible transmitting device will output the
optimum video signal based on this data.