Filter
Top Products
53
Messages are displayed when the lamp life has expired and when there is input of signals that cannot be used.
NOTE:
● The messages will not be displayed under factory default conditions.
● Set AMessage DisplayB in the Option menu to AONB. (A Page 41)
What to do when these
messages are displayed
Message Cause (Details)
Lamp Time Over
● Displayed when the lamp time has exceeded 2000 hours.
The message is displayed for a period of 3 minutes during each
projection.
Replace with a new lamp unit.
For details on replacement of the lamp unit, please consult your
authorized dealer.
Out of Range
● When there is input of video signals that cannot be used with this
unit
Input video signals that can be used.
No Input
● When no device is connected to the input terminal
● When the input terminal is connected but there is no signal
Input the video signals.
Lamp Time Over
Message