Filter
Top Products
28
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the P
OWER and SET buttons. Hold for at least three seconds and release.
3) Press the P
OWER button on the remote, and see if the cable or satellite box responds.
4) If there was a response, press SET. The codes are now set. If there was no response,
repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use the remote
control that came with your equipment.
5) Press SET to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to “MONITOR” and the other 2-way selector switch to
“VCR” or “DVD”.
2) Press the VCR or DVD P
OWER and SET buttons. Hold for at least three seconds and
release.
3) Press the VCR or DVD P
OWER button, and see if the VCR or DVD responds.
4) If there was a response, press SET. The codes are now set. If there was no response,
repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for the DVD
player), and there is no response, use the remote control that came with your equipment.
5) Press S
ET to exit.
Search Codes
Quick Setup
LCT2065-001B-A ENG.indd 28LCT2065-001B-A ENG.indd 28 12/18/06 10:10:57 AM12/18/06 10:10:57 AM