Filter
Top Products
7
4. The monitor requires a lot of electrical power
It is recommended that the monitor is connected directly to the wall socket, and not to another
device. When connecting the monitor to a wall socket that is being used by another device, or
when using an extension cord, be careful not to exceed the electrical capacity of the socket.
Do not turn the power on and off repeatedly in a short amount of time.
It subjects the monitor and the lamp to stress and may lead to malfunctions and the life of the
lamp being shortened.
5. The screen is made of plastic
Handle the screen very carefully as it can scratch easily. Do not rub, hit or press on it with any
hard objects. When the screen is dirty, gently wipe it with a soft cloth. Refer to the Appendix for
details on how to clean the screen.
6. Caution! Warm air from the air ducts
This unit has an air duct for cooling. The duct will blow warm air while the monitor is operating.
When placing the monitor, make sure not to locate it too close to wallpaper. The warm air could
cause the color of the wallpaper to change. Also, take care to keep children and pets away from
the warm air ducts. Long exposure to the warm air from the ducts could cause a minor burn.
7. Caution! Moving this monitor
When lifting this monitor, Do not hold by the screen frame. Holding the screen frame could
cause it to detach, causing the monitor to fall.
8. Do not replace the lamp immediately after use
The lamp becomes extremely hot during use. If the lamp is touched immediately after use
before it has a chance to cool down, there is a danger of burns. Be careful when handling the
lamp.
9. Do not touch the lamp glass
If the lamp is used when there is dirt from fi ngers on the lamp glass, there is a possibility of the
lamp breaking. Be careful not to touch the lamp glass.
10. ILA element characteristics
Do not project still pictures or pictures that have still segments for a long period of time. The still
parts of the picture may remain on the screen. This is a characteristic of ILA elements and not a
malfunction. The picture will disappear over time.
11. Condensation
When a heater is turned on or the monitor is moved from a cold place to a hot place, droplets
of water may form on the lamp and screen. This is called condensation. If the monitor is used
while this condensation is still present, the picture may seem distorted, and the inside of the
screen may become dirty. In this case, wait until the condensation has gone before using the
monitor.
12. Do not open the rear cabinet of this monitor
This monitor has a DIGITAL-IN terminal. Opening up the rear cabinet will violate the copyright of
the program or software shown on the monitor. Please do not open the rear cabinet.
13. Usable Time
Do not keep the monitor on for more than 24 hours consecutively. There is a possibility of the
life of the lamp being shortened.
Warnings
LCT2065-001B-A ENG.indd 7LCT2065-001B-A ENG.indd 7 12/18/06 10:10:51 AM12/18/06 10:10:51 AM