Filter
Top Products
32
TIMER RECORDING(cont.)
Check And Cancel
Programmes
Timer Warning
If you have programmed your
recorder to timer-record a
programme or a series of
programmes, a warning appears
on screen to tell you that the
recording is to start in 5 minutes.
NOTES:
●
The warning only appears if you’re not in the Timer mode at
that time.
●
If this recorder is being used as the player for tape dubbing,
the warning screen is recorded on the tape in the other video
recorder.
The warning blinks for the entire 5 minutes leading up to the
start of timer recording. To clear the display, press CANCEL.
– WARNING–
TIMER RECORDING
TO START SOON
[CANCEL]
6
q
12
45
3
6
8
0
7
9
2
1
3
OK
CANCEL
START+/–
TV PROG.
DATE+/–
PROG. CHECK
STOP+/–
ACCESS PROGRAMME
SCREEN
1
Press PROG CHECK. Each time you press the next
program’s information appears.
● Press OK and watch the front display panel as the
Start and Stop times, the Date and the Preset appear.
● If the recorder is turned on and the TV is set to its
VIDEO mode, you can check program information on
screen as well.
If All Information Is Correct . . .
. . . programming is completed.
If You Wish To Revise Data . . .
. . . with the recorder's power turned on, go to step 2.
If You Wish To Cancel A Program . . .
. . . with the recorder's power turned on, press CANCEL.
All information you input is deleted.
REVISE PROGRAMME IN-
FORMATION
2
Input the appropriate data using the START +/–, STOP
+/–, DATE +/– and TV PROG. +/– buttons on the
remote control.