53
( OPERATE Button — same as button on recorder.
੬ pg. 5
) DISPLAY Button switches display between time,
date, counter readings. ੬ pg. 16
q MODE Button accesses/closes On-Screen/
B.E.S.T. screen. ੬ pg. 21
w ADD TIME Button adds time to end of record-
ing (5 minutes each time button is pressed.)
੬ pg. 29
e DAILY Button enables timer recording of daily
serials. ੬ pg. 29
r WEEKLY Button enables timer recording of
weekly serials. ੬ pg. 29
t AUX Button sets recorder's input mode.
੬ pg. 35
y TIMER Button — same as button on recorder.
੬ pg. 29
u TV PROG. +/– Button selects preset. ੬ pg. 8
i DATE +/– Button inputs date of programme for
timer recording. ੬ pg. 31
o TV/VCR Switch enables remote control of VCR
or connected TV. ੬ pg. 40
p TV/VIDEO Button switches control between TV
and VCR. ੬ pg. 40
Q Fast Forward [FF] Button fast-forwards tape;
initiates high-speed forward search. ੬ pg. 11
W PAUSE Button — same as button on recorder.
੬ pg. 12
E STOP Button — same as button on recorder.
੬ pg. 11
R PROG CHECK Button accesses Program screens
(next program's information screen appears
each time button is pressed). ੬ pg. 32
IN/OUT Button registers edit-in and edit-out
points in memory during R.A. Edit mode.
੬ pg. 36
T OK Button enters selections made in on-screen
menus. ੬ pg. 8
START Button starts automatic editing. ੬ pg. 37
Y R.A. EDIT Button engages R.A. Edit mode.
੬ pg. 36
U TV VOL %fi Button controls volume of con-
nected TV. ੬ pg. 40
I ILLUMI GUIDE Button engages Illumi-Guide
mode. ੬ pg. 28
Installing Batteries
1 Open the battery compartment cover.
2 Insert 2 "R6"-size batteries (provided) in the correct
directions.
3 Replace the cover.
How To Use
The remote control can operate most of your video
recorder's functions, as well as basic functions of TV sets of
JVC and other brands.
੬ pg. 40.
● Point the remote control toward the sensor window.
● The maximum operating distance of the remote control
is about 8 m.
NOTE:
If for some reason the remote control doesn't work properly,
remove its batteries, wait a short time and then try again.