Filter
Top Products
AI232 Version 9.6x User’s Guide
Alias and Call Routing Configuration: Call Routing
7-4
Call Routing
To route calls within AI232, an alias must be configured according to the source
protocol and the destination protocol.
Note: Aliases created in AI198 are not visible to AI232 when it is running in
standalone mode. However, you can configure aliases in the AI232 local menu
system when it is in standalone mode.
Configuring an Alias
To route calls with AI232, you must configure an alias for a source and destination
protocol. The following procedure takes you through the configuration of an alias
name on a single AI232 card and between two AI232 cards.
Note: Specific configuration information about menu items in the following
procedures is located in sections Source/Destination Protocol Tables for the
AI198 Menu System on page 7-10 and Source/Destination Protocol Tables for
the AI232 Menu System on page 7-12.
Configuring an Alias in the AI198 Menu System
To configure an alias in the AI198 Menu System:
1. Log in to AI198.
2. At the prompt, type
menu. The main menu appears.