Filter
Top Products
AI232 Version 9.6x User’s Guide
AI232 Commands: creset
8-29
creset
Description
This command resets the error counters for a link or a range of links. There is no
output for this command. To see if the error counters were reset for the links you
specified, enter command staslc on page 8-92
.
Command Types
shell and winslc
Formats
For the shell command:
creset
range
For the winslc command:
winslc
baseport
creset
range
Parameters
Examples
This example displays the resetting of error counters for links 5 to 7.
range
Defines the link or a range of links being reset. Valid values are:
z A single link number (for example, 3 to reset error counters for link
3)
z A series of link numbers separated by commas (for example, 1,2,3
to reset error counters for links 1, 2, and 3)
z A range of link numbers separated by a dash (for example, 1-2 to
reset error counters for links 1 and 2)
z Any combination of a single link number, series, and/or range (for
example,
1,2-3 to reset error counters for links 1, 2, and 3)
z * to reset error counters for all links.
baseport
Defines the baseport number for AI232.
[232]creset 5-7
[232]