Filter
Top Products
AI232 Version 9.6x User’s Guide
AI232 Commands: timezone
8-114
timezone
Note: This command is only available when AI232 is in standalone mode.
Description
This command displays or changes the time zone or adjusts the time to reflect
daylight savings.
Command Type
shell
Formats
timezone [ -dston | -dstoff ] [ { + | - }
hh
:
mm
]
Parameters
Note: For +/-, enter the direction (+ = east) (- = west) of Universal Coordinated Time
(UTC) or Greenwich Mean Time.
The time entered here is the number of hours from UTC. For example, if the
desired location is in the Eastern Standard Time (EST) zone, enter -05:00 in
this field. This indicates a time 5 hours behind UTC.
Examples
This example displays the current daylight savings time setting.
-dston
Enables daylight savings time for AI232.
-dstoff
Disables daylight savings time for AI232.
hh
Defines the number of hours from UTC (Universal Coordinated Time or
Greenwich Mean Time).
mm
Defines the number of minutes from UTC (Universal Coordinated Time
or Greenwich Mean Time).
+
Specifies that the value is east of UTC.
-
Specifies that the value is west of UTC.
[232]timezone
Daylight saving is disabled on this system
Current time zone: +00:00
[232]