Filter
Top Products
9
3.4. Outline of Remote Station (Operator) Operations
The remote station is configured using a PC connected to the network, and a microphone
and speaker connected to the PC sound function. The audio transmissions for the host
station transceiver are input and output using the microphone and speaker connected to
the sound function of the remote station PC via the network.
The ARCP-990 is installed on the PC. In the case of use via the internet, VoIP Program is
installed on the PC. The host station transceiver connected via the network is controlled
by the remote station ARCP-990 operations. The ARVP-10R is a VoIP program and
supplies the transceiver with the transmitted and received audio of the host station side to
the microphone and speaker of the PC of the remote station side.
3.5. Remote Station (Operator) Configuration
PC
Sound Device
ARCP
-990
VoIP Software
TX Audio
LAN
/
WAN
(
Communication with host
station)
RX Audio
Connection
Audio
To exchange audio transmissions, connect the
microphone and speaker, or a headset to the PC sound
function. Use products compatible with the sound function
used.
PC
Specifications
CPU and memory:
Minimum values recommended by the operating system.
HDD:
To install both the ARCP-990 and VoIP Program, a
minimum of approx. 100 MB of free disk space is required.
If you are saving transceiver settings to data files, or
saving keying logs, additional memory space is required.
Sound function
To exchange audio transmissions, a sound function is
required.
Network
function
Connects to the home LAN.
To perform KNS operations via the internet, connect to a
network that is connected to the internet.
A wired network is recommended.
Software
Operating
System
Same as host station.