Filter
Top Products
15
● Timeout timer settings
During KNS operations, control data signals are transmitted using the network.
Consequently, if normal network operations are disabled for any reason, control of the
transceiver will also be disabled. Use the following menu to set the functions to stop
transmitting automatically after a fixed period if control should be disabled while
transmitting.
Menu No.
Function
Setting range
(Default)
6-02
Maximum continuous transmit time (time-
out timer)
Off, 3, 5, 10,
20, 30 [min]
(Off)
● Prohibit transmission setting
If using the host station as a receive-only station, set to transmission inhibited. Make
the settings using the following menu.
Menu No.
Function
Setting range
(Default)
6-03
Transmit inhibit
Off, On
(Off)
● Allocating the DATA SEND function to PF keys
Set the DATA SEND function to the PF keys to test the transmission of audio input from
the ACC2 connector or USB connector. In this example, the [PF A] key has been set.
Menu No.
Function
Set value
0-15
Assignment of the programmable function
to [PF A]
DATA SEND
Using the PF key, which has been set to the DATA SEND function, enables switching
between transmit and receive modes for audio input from the ACC2 connector or USB
connector.