Kenwood TS-990S Network Hardware User Manual


 
8
Firewall
To implement KNS operations via the internet, firewall
environments configured using in-house company
networks cannot be used. Use a home LAN environment.
Internet
environment
Provider
To implement KNS operations via the internet:
A high-speed wired broadband environment using
xDSL, FTTH, or CATV network is required. (1Mbps
min. recommended.)
A global IP address is required. (See Note 3.)
The ability to use protocols and ports to transmit the
data signals that control the transceiver and audio is
required.
Protocol: TCP; port No.: 50000 (ARHP-990 default
value)
Protocol: UDP; port No.: 33500 (ARVP-10 default
value)
For details, contact your internet service provider.
Proxy
A proxy server cannot be used.
Note 1: Other general purpose VoIP program can be used instead of the ARVP-10.
Support for selecting, installing, and operating VoIP software is not available from
JVC KENWOOD Corporation.
Note 2: Refer to the user manual for the broadband router to be used before performing
the settings.
Note 3: KNS operations are possible even if the global IP address is variable, but the IP
address may change with uncertain timing. In such cases, it is necessary to check
and change the IP address of the connected host when connected from a remote
station, which reduces user-friendliness. Consequently, using an environment in
which the host station global IP address is fixed, is recommended. Furthermore, if the
global IP address cannot be fixed, using a dynamic DNS service enables operations
in the same way as an environment with a fixed global IP address.