Filter
Top Products
27
Question
Answer
Operations
Why can't I use the ARCP-480 or
ARCP-590?
The ARCP-480 is for the TS-480 only.
The ARCP-590 is for the TS-590 only.
Use the ARCP-990 with the TS-990S.
Why can't I use the ARHP-10 or
ARHP-590?
The ARHP-10 is for the TS-480 only.
The ARHP-590 is for the TS-590 only.
Use the ARHP-990 with the TS-990S.
Reception sound quality is different
from the TS-990 itself.
Audio via a network is affected by the
audio encoding and data bandwidth, so
sound quality may differ from the actual
received quality. These are VoIP
specifications, and cannot be improved.
I want to control an antenna rotator
or peripheral device other than the
transceiver.
The current system is compatible only
for transceiver control.
There are so many limitations. Can
this system operate?
Although different from normal
operations, considerably practical
operations are possible in ordinary
communications.
There may be some initial confusion
over the standby timing until you are
familiar with the specific delays via the
network.
We recommend first becoming familiar
with the transceiver operations from the
PC using a single ARCP-990, and then
attempting operations on a network
environment as the next step.
When attempting actual operations,
unless operating with a partner, the
internet remote operation can be hard to
understand.