Filter
Top Products
20
● Remote station PC
Download and install the ARCP-990 onto the PC from the KENWOOD website:
http://www.kenwood.com/i/products/info/amateur/software_download.html
After starting the ARCP-990, select "Settings" in the "Tool" menu, and set "KNS
(KENWOOD NETWORK COMMAND SYSTEM) (ARHP-990)" in "Connection to the
TS-990S". Click the "Setting" button to configure the KNS connection.
On the remote operation within the home LAN area, the VoIP function built into the
ARCP-990 and ARHP-990 can be used. In this case, in "Configure VoIP" in the "Tool"
menu of the ARCP-990, select the speaker and microphone connected to the PC.
For the setting methods, refer to the ARCP-990 help file.
On the remote operation via the internet, install the VoIP Program. Install the same VoIP
Program that was installed on the host station.
Caution:
On the remote operation via the internet, you can use a VoIP Program other than
the ARVP-10. However, support for selecting, installing, and operating VoIP
software is not available from JVC KENWOOD Corporation.