Filter
Top Products
A-61371 September 2004 1-11
To turn the power off
• Press the Power switch of the scanner to the O (Off) position.
Auto Power Save/
Projection Lamp
functions
This system provides two functions that help to decrease power
consumption:
• The Auto Power Save function that automatically shuts down power
to the printer heater.
• The Auto Projection Lamp OFF function that automatically turns off
the Projection Lamp of the scanner.
Both are activated when the system is left idle for a specified period of
time.
These functions may be disabled or enabled. When enabled, timing
can be selected from either 30 or 60 minutes. The default for both of
these functions is Disabled. Contact your Kodak Service
Representative for more information.
When the system is in the Auto Power Save mode, each outside
segment of the Multi-Print Display LEDs light up sequentially.