Filter
Top Products
2-4 A-61371 September 2004
Using the Shift
function on the
Control Panel
When you use the Shift function (Clear/Stop key) on the Control Panel,
other options are available.
Control Panel - Shift Function
NOTE: All of these functions can be performed when the Shift key and
one of the keys described below are pressed.
1 Job Recall — when this key is pressed together with the Shift key,
the program registration locations (1J, 2J and 3J) are called. Each
time this key is pressed while the Shift key is held down, the display
rotates through 1J, 2J and 3J.
2 Resolution —
sets the resolution of the scanner.
• When the scanner is connected to the printer, available
resolutions are: 400 dpi (4H) and 600 dpi (6H).
• When the scanner is connected to the PC through PowerFilm
Application Software, available resolutions are: 200, 300, 400,
600 and 800 dpi (2H, 3H, 4H, 6H and 8H respectively).
3 Zoom - sets zoom magnification.
• Zoom+: when Zoom+ is pressed with the Shift key, the
magnification is increased by an increment of 0.0IX (up to
2.00X).
• Zoom clr: clears the current zoom setting when this key is held
down together with the Shift key for one second.
• Zoom-: when Zoom- is pressed with the Shift key, the
magnification is decreased by a decrement of 0.01X (down to
0.50X).
4Shift — the Shift key must be pressed when you want to access
one of the functions described in this section: Lamp Illumination,
Resolution, Job Recall, Zoom or PC/PR.
5 PC/PR — when selected (with the Shift key) the connection to the
PC or printer is selected. This key is not valid unless the PC
interface cable is connected to the PC.
Start10 1 C
Auto
Lighter Darker
Exposure
Paper Selection
Print Position
Print Mode
Text
Fine
Photo
Job Recall Resolusion Zoom- Zoom clr Zoom+ Shift PC/PR
Film Type
Auto
Nega
Posi
12
A4
A3
A4
Paper Selection
11×17
1
2
/
8 ×11
Other
8 ×11
8 ×11
1
2
/
1
2
/
2
1
3
4
5