Filter
Top Products
A-61371 September 2004 1-3
Power source The power source voltage requirements are as follows:
• Use a power source with minimal voltage fluctuation.
Power Source: 50Hz-60Hz
Voltage fluctuation: within ± 10%
Frequently fluctuation: within ± 3%
NOTE: If you are in doubt, call a qualified electrician.
• The outlet should be located near the unit and be easily accessible
so that the power cord can be unplugged immediately if necessary.
• NEVER connect any other appliances or machines by means of a
multiple socket to the outlet being used for the unit.
• Make sure that the power cord and extension cord do not become
caught in any mechanism of the system. Do not allow either the
power or extension cord to become caught underneath the weight of
the unit.
Grounding To prevent electrical shocks caused by electrical leakage, always
ground the printer. Connect the grounding wire to:
In the United States:
• Connect the grounding wire to:
- The ground terminal of the outlet.
- A grounding contact that complies with the local electrical
standards.
• A grounding contact that complies with the local electrical standards.
• NEVER connect the grounding wire to a gas pipe, the grounding wire
for a telephone, or a water pipe.