Filter
Top Products
10 A-61195 July 2003
Adjusting the trays There are two trays on the scanner: the ADF input tray for loading documents
to be scanned through the automatic document feeder and the output tray
which receives scanned documents from the ADF.
ADF input tray 1. Lift the ADF input tray to about a 45° angle.
2. Pull the ADF input tray wire leg down.
3. Place the wire leg on top of the clips on the flatbed cover.
4. Press down slightly on the ADF input tray to snap the wire leg into the clips.
5. Pull the ADF input tray extension wire out to the desired length.
Clips
Wire leg
ADF input tray
ADF input tray
ADF input tray extension wire