Filter
Top Products
32 A-61195 July 2003
Replacing the
feed module
After approximately 100,000 pages have been scanned through the ADF, the
separation pad on the feed module may become worn and cause document
feeding problems. In this case, you should replace the feed module.
Four replacement feed modules are included with your scanner. To order more
feed modules, consult your dealer (order KODAK Feed Module for Scanners
i50/i60/i80; CAT. No. 162-3362).
1. Open the ADF.
2. Remove the feed module by squeezing the side tabs on the module and
pulling it out.
3. Insert a new feed module.
4. Slide the feed module into position until it clicks into place.
5. Close the ADF.
The scanner is now ready for use.
Feed module
Side tabs