Kodak Series 3 Printer User Manual


 
34 www.kodak.com/go/support
Troubleshooting
Printer is
jammed
(Paper and/or
cartridge lights
may blink
quickly)
IMPORTANT:
Use only Kodak color cartridge & paper kits for your
printer dock. Do not use inkjet paper.
If the Paper light is blinking quickly:
1 Remove the paper tray (page 7).
2 Disconnect the power from the printer dock for 5 seconds, then
reconnect the power.
Carefully remove the paper if it does not automatically eject.
IMPORTANT:
Always check the paper slot on the back of the
printer dock for jammed paper:
3 Remove the paper supply from the paper tray. Carefully "fan" the
paper to keep the sheets from sticking together.
4 Reload the paper tray. Do not exceed the fill line.
5 Re-install the paper tray, then press to resume printing.
If the Color cartridge light is blinking quickly, check the color cartridge:
IMPORTANT:
The color cartridge may lock in place if there is a paper
error. Do not attempt to remove the cartridge without
first clearing the paper error. Make sure the Paper light is
off before attempting to remove the cartridge (see Paper
light under Printer dock status lights, page 41).
Remove the color cartridge, remove any slack from the ribbon, then
re-install the cartridge (page 4). Press to resume printing.
If... Try the following