Filter
Top Products
Troubleshooting
www.kodak.com/go/support
43
Battery charging lights
Light status Cause Action/solution
All lights are off The camera may not be properly
seated on connector.
Reseat the camera on the printer
dock (page 10).
The camera is turned on. Turn off the camera.
An unrecognized battery type is
installed, or camera does not
support charging.
Install a Kodak EasyShare Ni-MH
rechargeable battery pack or
Kodak EasyShare Li-Ion
rechargeable battery (page 8). See
your camera user’s guide for other
charging options.
One steady green light The camera was just placed in
camera dock.
None; dock is checking the charge
status of the battery.
Ascending steady
green lights
The battery is charging. Charging
is complete when all three lights
are lit.
Leave the camera on the dock to
continue charging or maintain
charge.
One blinking red light The battery is not properly
installed.
Re-install the battery.
The battery or connector pin is
damaged.
Check for damage.
The camera and battery have been
exposed to extreme temperatures.
Slowly return the camera and
battery to room temperature.
Descending blinking
green lights
The Ni-MH battery pack refresh
cycle in progress: discharging
(lights turn off as discharging
progresses).
Leave the camera on the dock to
continue refresh cycle (page 11).