Filter
Top Products
Specifying Settings in Configuration Menu 27
Memory Reception
In cases when confidential faxes are being received, the received document
can be stored in memory and printed at a specified time or when memory
reception is turned off.
Memory reception can be used with the following settings.
Start/end time settings: Not set
“MEMORY RX MODE” is normally set to “ON”. To print a fax saved in
memory, set “MEMORY RX MODE” to “OFF”.
Start/end time settings: Set
Memory reception mode begins and ends at the specified time.
Example 1: When “ON TIME” is set to 18:00 and “OFF TIME” is set to
8:00
The machine is in memory reception mode from 18:00 to 8:00 and in
normal reception mode, where faxes are printed after being received,
from 8:00 to 18:00.
Example 2: When “ON TIME” is set to 12:00 and “OFF TIME” is set to
12:00 (the start time and end time are the same)
“MEMORY RX MODE” is normally set to “ON”; however, faxes saved
in memory are printed at 12:00.
Setting Up the Memory RX Mode
1 With the Fax mode screen displayed, press the Menu Select key to enter
Menu mode.
2 Press the + or , key to display the RX SETTING screen, and then press
the Menu Select key.
3 Check that the MEMORY RX MODE screen appears, and then press the
Menu Select key.
4 Using the * and ) keys, select “ON”, and then press the Menu Select
key.
The ON TIME screen appears.
5 Specify the time when memory reception mode begins, and then press
the Menu Select key.
The OFF TIME screen appears.
" To specify no start time, press the Menu Select key without specifying
a time.The PASSWORD screen appears. Skip to step 7.