Filter
Top Products
Receiving Faxes Automatically46
Receiving Faxes Automatically
" When the machine is turned off, faxes cannot be received. Therefore,
be sure to leave the machine turned on.
" To print a received fax, change the paper type to PLAIN PAPER and
the paper size to A4, LEGAL, LETTER or OFICIO (Mexico only).
If the RX Mode parameter on the RX SETTING menu is set to “Auto RX”, no
special operation is needed in order to receive the fax. Reception begins after
the specified number of rings.
" If the RX Mode parameter on the RX SETTING menu is set “Manual
RX”, the fax is not received automatically. For details, refer to “RX
SETTING” on page 21.
" If “Memory RX Mode” is set to “ON”, printing does not begin automati-
cally after the fax is received. A received document is saved in mem-
ory and is printed at the time specified for “Memory RX Mode”. In
addition, if “Memory RX Mode” is set to “OFF”, the fax is printed. For
details on “Memory RX Mode” in the configuration menu, refer to “RX
SETTING” on page 21. For details on specifying the settings for
“Memory RX Mode”, refer to “Setting Up the Memory RX Mode” on
page 27.
" This machine does not support polling reception.
Receiving Faxes Manually
" When the machine is turned off, faxes cannot be received. Therefore,
be sure to leave the machine turned on.
" To print a received fax, change the paper type to PLAIN PAPER and
the paper size to A4, LEGAL, LETTER or OFICIO (Mexico only).
If a telephone is connected to this machine and the same line is used for
phoning and faxing, the fax can be received after picking up the handset.
1 After the telephone rings, pick up the handset.
" If “RX MODE” on the RX SETTING menu is set to “Manual RX”, the
machine will continue ringing whether the call is being received from a
fax machine or a telephone.