Filter
Top Products
Speed Dialing 59
9 To change or to delete other one-touch dial information, press the
one-touch dial key, and then repeat the procedure starting from step 5.
OR
To finish the procedure and return to the Fax mode screen, continue
pressing the Cancel/C key until the Fax mode screen is displayed.
Speed Dialing
Programming a Speed Dial Number
Register frequently used fax numbers with speed dial numbers (maximum
100). Enter the speed dial number when sending a fax to recall the fax num-
ber.
1 Press the Menu Select key, then the , key three times.
2 Check that the FAX REGISTRATION screen appears, then press the
Menu Select key, and then press , key.
3 Check that the SPEED DIAL screen appears, and then press the Menu
Select key.
4 Using the keypad, enter the 3-digit speed dial number (ex. 011) that you
want to program.
" If the speed dial number that is entered is already registered with a
recipient, the message “REGISTERED!” appears. Press the Menu
Select key, and then press a speed dial number with no recipient reg-
istered.
" If you enter 2-digit speed dial number, make sure to enter [0] at first.
For example when speed dial number is [11], enter [011].
5 Enter the name of the speed dial to be programmed, and then press the
Menu Select key.
" Text up to 20 characters long can be entered for the name.
" For details on entering/editing text and the characters that can be
entered, refer to “Entering Text” on page 79.
" To cancel programming, press the Cancel/C key. (To cancel program-
ming while the name is being entered, press the Menu Select key,
and then press the Cancel/C key.)