Filter
Top Products
Installing the fax driver
2
Fax Driver 2-5
2.2 Automatic installation using the installer
If this installer is used, the fax driver can also be installed at same time as the
necessary printer driver.
The operations vary depending on the connection method, and if connecting
with Port9100, specify the IP address manually. If connecting with USB,
specify the machine that is automatically detected.
2.2.1 Installer operating environment
*
Before performing the installation in Windows NT 4.0 for this machine to be
connected directly to the network using the TCP/IP protocol, the Microsoft
TCP/IP Print Service must be installed on the computer.
2.2.2 Settings of this machine
Specify the IP address of this machine.
Depending on the connection method and protocol, change the network set-
tings of this machine.
- Port9100: Enable the RAW port setting on the TCP/IP Setting screen, and
specify the RAW port number (default setting is “9100”).
- IPP: Enable IPP print on the IPP Setting screen.
2
Note
For details on IP address, RAW port number settings and IPP settings of
this machine, refer to the User’s Guide [Print Operations].
Operating system Windows NT 4.0 (Service Pack 6a or later)
*
Windows 2000 Professional/Server (Service Pack 3 or later), Win-
dows XP Home Edition/Windows XP Professional, Windows XP
Professional x64 Edition, Windows Vista Home Basic/Home Pre-
mium/Ultimate/Business/Enterprise, Windows Vista Home Basic/
Home Premium/Ultimate/Business/Enterprise ×64 Edition, Win-
dows Server 2003 Standard Edition, Windows Server 2003 x64
Edition, Windows Server 2008 Standard/Enterprise, Windows
Server 2008 Standard/Enterprise x64
Processor According to the environment recommended for the operating sys-
tem
Memory Capacity recommended for the operating system
With sufficient memory resources in the operating system and ap-
plication being used