Filter
Top Products
Specifying Settings in Configuration Menu 27
Memory Reception
In cases when confidential faxes are being received, the received document
can be stored in the memory and printed at a specified time or when memory
reception is turned off.
Memory reception can be used with the following settings.
Start/end time settings: Not set
“MEMORY RX MODE” is normally set to “ON”. To print a fax saved in the
memory, set “MEMORY RX MODE” to “OFF”.
Start/end time settings: Set
Memory reception mode begins and ends at the specified time.
Example 1: When “ON TIME” is set to 18:00 and “OFF TIME” is set to
8:00
The machine is in memory reception mode from 18:00 to 8:00 and in
normal reception mode, where faxes are printed after being received,
from 8:00 to 18:00.
Example 2: When “ON TIME” is set to 12:00 and “OFF TIME” is set to
12:00 (the start time and end time are the same)
“MEMORY RX MODE” is normally set to “ON”; however, faxes saved
in the memory are printed at 12:00.
Setting Up the Memory RX Mode
1 With the Fax mode screen displayed, press the Menu Select key to enter
Menu mode.
2 Press the + or , key to display the RX SETTING screen, and then press
the Menu Select key.
3 Check that the MEMORY RX MODE screen appears, and then press the
Menu Select key.
4 Using the * and ) keys, select “ON”, and then press the Menu Select
key.
The ON TIME screen appears.
5 Specify the time when memory reception mode begins, and then press
the Menu Select key.
The OFF TIME screen appears.
" To specify no start time, press the Menu Select key without specifying
a time.