Filter
Top Products
Basic Fax Operation30
Basic Fax Operation
This section contains basic information on sending faxes.
Sending a Fax Using the ADF
If the ADF is used, original documents containing multiple pages can be auto-
matically scanned.
" Do not load original documents that are bound together, for example,
with paper clips or staples.
" Do not load more than 50 sheets; otherwise a original document mis-
feed or damage to the document or machine may occur.
" If the original document is not loaded correctly, it may not be fed in
straight, or an original document misfeed or damage to the document
may occur.
" Do not open the ADF cover while documents loaded into the ADF are
being scanned.
1 Press the Fax key to enter Fax mode.
2 Make sure that there is no document on the original glass.
3 Put the document into the ADF
document feed tray face up.
4 Adjust the document guides to the document size.
5 Press the Resolution key to specify the desired image quality.
" The document image quality can be adjusted by pressing the Resolu-
tion key. For details, refer to “Improving Resolution” on page 34.
6 Specify the fax number of the recipient in one of the following ways:
– Direct dialing
– Using the one-touch dial key (including the group dial function)
– Using the Speed Dial function
– Using the Phone Book function