Filter
Top Products
5-7. FTP Configuration
II Network Setup - Administrators only 106
Chapter 5 Web Utility
Changing FTP Setting
The following FTP settings may be changed as noted.
Proxy Server Address
Proxy Server Port Number
Enable PASV Mode
FTP Client Port Number
FTP Server Connection Timeout
To alter any of these FTP settings, follow these steps:
1 Open the FTP configuration page.
2 In the FTP Settings section, select the field you wish to change.
3 Enter the new settings.
4 At the bottom of the page, type in the system password in the provided field.
5 Click [Apply].
● Changes do not take effect until you start the copier. Be sure to wait at least 10 seconds after turning off
the main power switch before you turn the copier back on.