Filter
Top Products
6-1. Selecting the Destination
III Scanner 148
Chapter 6 Using the Scanner Functions
10 Input the location of the shared folder.
● When the location of a shared folder is not specified correctly, scanned data cannot be sent.
Input example: When sending data to [PushScan] in the [Data] folder of the PC:
/Data/PushScan
zUp to 254 characters can be entered for [Folder] using alphanumerics or symbols.
11 Touch the [OK] key.
→ The [PC(SMB) Input] screen is displayed.
12 Touch the [User Name] key.
→ The [Data Input] screen is displayed.
13 Input the user name of a user having access rights to a shared folder on the PC to which
data is sent.
zUp to 63 characters can be entered for [User Name] using alphanumerics or symbols.
14 Touch the [OK] key.
→ The [PC(SMB) Input] screen is displayed.
15 Touch the [Password] key.
→ The [Data Input] screen is displayed.
16 Input the password of a user having access rights to a shared folder for the PC to which
data is sent as required.
zUp to 63 characters can be input for [Password] using alphanumerics or symbols. Entered password is displayed by
asterisks(*).
17 Touch the [OK] key.
→ The [PC(SMB) Input] screen is displayed.
For more information, refer to [6-3. Setting Scanner Functions] ( Page 164).