Konica Minolta 7228 Printer User Manual


 
8-2. Scanner Initial Settings
IV Scanner Key Operator - Administrators only 194
Chapter 8 Key Operator Settings
File Form default
Text/Photo enhance mode
Scan Density
Scan mode
Disable Entry Function
Auto reset timer
You can set how long the copier will wait with the [Scanner] screen left unused until it automatically
returns to the [Printer basic mode] screen.
zThe factory default is [OFF] (Do not switch screens automatically.).
1 Select [Auto reset timer] on [Initial setting] screen.
When you touch the [ ] or [ ] key, the selection item is switched.
zFor details on the procedure for displaying the [Initial setting] screen, refer to [Switching the Key Operator Mode]
( Page 190).
2 Touch the [EDIT] key, then change the setting.
Each time you touch the [EDIT] key, the setting is switched.
Select the setting item from among the following.
OFF 30 60 90 120 150 180 210 240 270 300 (seconds)
When you select [OFF], auto resets are not triggered.
3 Touch the [RETURN] key.
From now on, the copier operates in accordance with this setting.