Konica Minolta 7228 Printer User Manual


 
4-8. E-Mail (SMTP) Setup
II Network Setup - Administrators only 60
Chapter 4 Setting from the Control Panel
E-Mail (SMTP) Setup (Part 2 of 2)
1 Use [ ] or [ ] to access to [E-Mail (SMTP) Setup] screen (2/2) from screen (1/2).
zFor details on the procedure for displaying the [Network setting] screen, refer to [4-2.Method for Setting Network from
Control Panel] ( Page 23).
Connection Timeout
This function automatically stops the sending if communications bog down during data uploading to the
SMTP server and a certain period of time elapses.
[SMTP Timeout] sets this time value.
1 Touch the [EDIT] key on the [Connection Timeout] menu.
Each touch of the key will extend the timeout setting by 30 seconds, with a maximum value of 300
seconds.
Maximum Message Size
This sets the maximum capacity that the SMTP server can receive for one E-mail.
1 Touch the [000] digit key on the [Maximum Msg Size] menu.
Using the control panel, enter value between 0 and 100MB.
zThe factory set default setting is [0] (unlimited).
zA message which exceeds the maximum message-size setting cannot be sent. Mail messages that have not been
sent are placed on the unsent mail list.