Filter
Top Products
Configuration Menu Overview 4-19
" All factory default values are shown in bold.
ETHER-
NET
TCP/IP ENABLE
Settings
YES/NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
IPV4 DHCP/
BOOTP
Settings
YES/NO
Select whether or not the IP
address is automatically
acquired.
If
YES is selected, the IP address
is automatically acquired.
If NO is selected, the IP address
is not automatically acquired.
IPV4
ADDRESS
Settings
192.168.001.002
Set the IPv4 address for this
printer on the network.
Use the +, ,, *, and ) keys to
specify the value.
If the IP address is manually
specified, DHCP/BOOTP is
automatically set to
NO.
DEFAULT
ROUTER
Settings
000.000.000.000
Specify the IPv4 address of the
router if one is on the network.
Use the +, ,, *, and ) keys to
specify the value.
SUBNET
MASK
Settings
000.000.000.000
Specify the subnet mask for the
network.
Use the +, ,, *, and ) keys to
specify the value.