Filter
Top Products
Configuration Menu Overview28
6 BUZZER VOLUME
Setting
HIGH / LOW / OFF
Select the volume of the sound produced when
a key is pressed and of the alarm that is
sounded when an error occurs.
7 INITIAL MODE
Setting
COPY / FAX
Specify the default mode when the machine is
turned on or when all settings in the control
panel return to their default settings.
8 TONER EMPTY STOP
Setting
ON / ON(FAX) / OFF
Select whether or not printing, copying and fax-
ing stop when the toner has run out.
If
ON is selected, printing, copying and faxing
stop when the toner runs out.
If ON (FAX) is selected, only faxing stops
when the toner runs out.
If
OFF is selected, printing, copying and faxing
do not stop when the toner runs out.
9 TONER NEAR EMPTY
Setting
ON/OFF
When the toner is nearly run out, a warning
message appears.
10 AUTO CONTINUE
Setting
ON / OFF
Select whether or not printing continues when a
size error occurs during printing.
11 CALIBRATION
Setting
ON / OFF
Select whether or not to perform image stabili-
zation. If
ON is selected, image stabilization is
started.
12 REMOTE MONITOR
Setting
ON / OFF
Select whether or not setting remote monitor.
If
ON is selected, technical support can access
the menu mode.
If OFF is selected, technical support cannot
access the menu mode.
" This setting is for technical support uses.
Change the setting only when it is
necessary.