Filter
Top Products
7. Settings and Operations for Scan Functions
100
Setting from the copier control panel
1. Enter the Administrator mode.
2. Select “Network set” – “E-mail/I-Fax” – “Print.”
3. The same items as those with Network Management Utility Light can be set.
Scanning Operation for Internet Fax Transmission
You have three ways to choose from to perform the scan operation depending on
whether the destination is set with a one-touch key or a one time key, or set through
direct input from the copier control panel.
■
Specifying the destination using a one-touch key:
1. Press the Scan key on the copier.
2. Select the “Destination” tab.
3. Select the “IndexList” key.
4. Select the target index from the index list. Touch “Enter.” (Registering Index
☞p.110)
5. Select the one-touch key in which the destination has been set.
6. Set the scanning mode. (Ref.: Setting the Scanning Mode) ☞p.102
7. Specify the document. (Ref.: Specifying the Document) ☞p.103
8. Press the Start key.
MEMOS
• One-touch key registration is possible from Network Management Utility Light.
• For details of one-touch key registration, see “Advance Registration of
Destinations” of chapter 7.
☞
p.110
■
Specifying the destination using a one time key:
The destination may be set using a one time key. ☞p.115
4334P209CA