Filter
Top Products
9. Troubleshooting
132
If the problem persists after all these procedures have been performed, read the User
Manual of the copier.
Symptom Possible Cause Action
Continuation
from previous
page (Printing
does not start
despite the
completion of
printing setup
on the PC.)
The print job is locked. Check with the job list on the
copier control panel to see if the
print job in question is locked. If
so, unlock it.
The connection of the
controller to the
network is yet to be
established.
Consult the network administrator.
If the copy track
function is active, an
illegal access number
might have been
entered.
Enter the correct access number.