Filter
Top Products
7. Settings and Operations for Scan Functions
89
■
Setting the Mail Options
The subject and message of e-mail can be set for mail transmission through Scan to
E-mail.
Setting from Network Management Utility Light
1. Start Network Management Utility Light.
2. Enter the password and log on to the Administrator mode.
3. From the “Network” tab, select “E-mail/Internet FAX” – “E-mail.”
4. Set the following items.
Subject : Type the title of the e-mail.
Setting value : 64 characters
Description : Type the message of the e-mail.
Setting value : 256 characters
When the above settings are made, the subject and message are appended to the e-
mail in Scan to E-mail.
k4334P177CA