Filter
Top Products
7. Settings and Operations for Scan Functions
87
Controller Setting
■
E-mail Transmission Setting
Set the mail server (SMTP server) to enable mail transmission.
Setting from Network Management Utility Light
1. Start Network Management Utility Light.
2. Enter the password and log on to the Administrator mode.
3. From the “Network” tab, select “E-mail/Internet FAX” – “Send.”
4. Set the following items.
SMTP Server : Set the IP address of the SMTP server.
Port Number : Set the port number of the SMTP server.
(The default value of “25” is generally used.)
SMTP Connection Timeout : Set the communications timeout value with the
SMTP server.
Setting values : 30 to 300 sec.
Maximum E-mail Size : Set the maximum size of transmission mail
capacity.
Setting values : No Limitation, 100 to 3000 KB (100 increments)
Binary Division : Set whether to divide mail exceeding the
maximum mail size into two or more mails (in
units of binary).
☞
p.88, ☞p.94
Setting values : Yes, No
k4334P175CA