Filter
Top Products
4-1
CHAPTER 4 BASIC OPERATIONS
1
1. Basic copying procedure
2
3
4-1
4. Copy quality selection
Copy quality can be selected according to the original type. Press the
image mode selection key to light the respective indicators.
To adjust automatically: Auto Exp. indicator
Text and photo originals: Text & Photo indicator
Photo originals: Photo indicator
Text originals: Text indicator
* The copy exposure can be adjusted in all image modes (see "Auto
exposure adjustment", "Text and photo original exposure
adjustment", "Text original exposure adjustment" and "Photo original
exposure adjustment" on pages 6-1 and 6-2).
* The image mode used in the initial mode can be selected (see
"Image mode" on page 6-1).
(English text panel) (Symbol panel)
4-2
(English text panel) (Symbol panel)
1. Warm-up
Turn the main switch ON (|). When warm-up ends, the Start indicator
lights.
* If you set an original and press the Start key before warm-up ends,
copying automatically starts at the end of warm-up.
(English text panel) (Symbol panel)
2. Function selection
Set copy functions as desired.
3. Paper size selection
Select the paper source that contains the paper to be used from the
upper drawer, lower drawer (optional) and multi-bypass using the
Paper Select key.
* The drawer to be selected by default can be specified (see "Default
drawer" on page 6-2).
When the Auto Exp., Text & Photo, Photo and Text indicators are all
turned off, the copier is in the economy mode. In the economy mode,
the image density becomes lighter to reduce toner consumption. Use
this mode when high quality printing is not required.
(English text panel) (Symbol panel)