Filter
Top Products
CHAPTER 6 COPIER DEFAULT SETTING
Default code
F11
F12
F13
F14
F15
F16
Setting item
Lower drawer paper size
(optional)
Turning multi-bypass non-
standard size paper setting ON/
OFF
Non-standard size paper width
setting for multi-bypass
Copy limit
DF auto start
Layout (4 in 1)
Setting code
(Inch)
1: 8 1/2" x 14"
2: 8 1/2" x 11"*
3: 5 1/2" x 8 1/2"
(Metric)
1: A4*
2: A5
3: Folio
1: ON
2: OFF*
(Inch)
4.13" to 8.50" (4.13" *)
(Metric)
105 to 216 mm (105 mm*)
* The maximum width of the
print area is 210 mm, with
respect to the paper
centerline.
1 to 99 copies (99 copies*)
1: ON*
2: OFF
1: Landscape
2: Portrait*
Setting contents
Sets the size of paper loaded in the lower drawer.
* This setting item will not be displayed if the optional
drawer is not installed.
Set to “ON” when using non-standard size paper with
the multi-bypass.
Sets the paper width for the multi-bypass to use non
standard size paper.
* The maximum paper length is 14"/355.6 mm.
* This setting item will not be displayed if “OFF” is
selected in “Turning multi-bypass non-standard size
paper setting ON/OFF”.
Limits the number of copies that can be made at a time.
Set to “OFF” when not wanting copies to be made
automatically when an original is placed in the DF.
* This setting item is not displayed on the 18 ppm copier.
When using the 4 in 1 layout copying function (see page
5-1), the page arrangement can be selected.
1 Originals of landscape orientation
Original insertion direction
2 Originals of portrait orientation
Original insertion direction
* With the 15 ppm copier, this setting item will not be
displayed if the optional memory copy board is not
installed.
6-3