Filter
Top Products
Troubleshooting
12-37
12
3 Remove the jammed original.
If the original tears, remove every loose scrap from
inside the machine.
If the original is difficult to remove, turn the dial. The
original will scroll out to a position where it can be
removed easily.
If the original tears, remove every loose scrap from
inside the machine.
If you are using the document processor, go to step
4. If you are using the document processor (Dual
scan DP), go to step 6.
4 Lift up the reverse unit.
5 Remove the jammed original.
If the original tears, remove every loose scrap from
inside the machine.
6 Put the reverse unit back in its original place and
close the document processor top cover.
7 Reload the originals on the document processor
tray.